How to make a wine cork initial

We drink wine and many of the bottles come with corks.  Our last name begins with the letter “H”.  I had a wooden “H” that I recently purchased from JoAnns.  Naturally I thought….what could I make and quickly decided to make a monogram “H” using wine corks.  Genius! 

I gathered all the corks and we didn’t quite have enough. 

…I vowed to drink more wine.  😉  

bowl of corks

I didn’t want to corks to stick out their entire length so I had my hubby cut them in half.  Of course that resulted in twice as many corks but still not quite enough so…

…I will have to keep my vow to drink more wine.  😉

corks cut in half

The letter “H” was plain wood so I painted it white and started hot gluing the corks on.  I didn’t start with any pattern or anything but by the time I was nearly done I had this….   

cork project

Ehhhh….not so much.  The corks on the right are a little wonky and the corks on the left are lined up a little neater.  I also am not happy with the white that shows through.  Hmmmm…..

So I decided to paint the “H” brown to see if that helped.  I removed all the glued on corks, painted the “H” and then began gluing the corks back on.  I also am putting them four across instead of three. 

brown cork H

I think it’s looking better….what do you think?

You will have to stay tuned to see the finished project.  🙂 

(((hugs))) ~lisa

How to make a twine covered glass jar

This is a pretty easy project and is a great way to upcycle those glass jars you have been saving! 

twine covered glass jar

For this project you will need:

  • Glass jar(s)
  • Twine
  • Craft glue
  • Hot glue
  • Embellishments

I chose a glass baby food jar.

DSC07518

If you look closely you will see that I did not get all the label off of the jar.  No worries as it is about to be covered by the twine.

I chose a smaller size twine as the glass jar I was working with was smaller in scale than say, compared to a spaghetti jar.  It also depends on the “look” you are going for.

DSC07517

I tied the twine around the top and put a few dabs of the craft glue down to help anchor it.  I then began wrapping around the jar being careful to keep the twine pulled tight and keep the rows close together.  After every three or four rows of twine, I would add a small line of craft glue and wrap over it. 

DSC07522

After it was completely wrapped I cut the end off and glued it down with craft glue. 

I then used my hot glue gun to add a flower to the front of it. 

DSC07525

I think it still needs a little something…what would you add?  Maybe some ribbon or lace around the middle? 

DSC07529

I am using mine to hold my hot gun glue sticks so they are close by but not falling out of the  bag and all over my work table.  🙂

DSC07526

What have you created lately?

(((hugs))) ~lisa