Who is addicted to Pinterest? It’s okay…you can raise your hand…you are among friends here.
I admit to having a slight addiction to Pinterest meaning that several times a day occasionally I will peruse all the boards and get lost in all the awesome things that I could create. I was looking for a new way to hold my necklaces and bracelets so I turned to Pinterest for inspiration.
I came across several ideas that would totally work and decided I could make one. And when I say *I*, I mean my husband…haha!! Here are some of the inspiration photos that I got off of Pinterest that got my creative juices flowing.
I absolutely LOVE the hand doorknob in the pic above. Isn’t it awesome?! I couldn’t find it anywhere. I even looked online so if you find it be sure and leave me a comment because even though the project is finished I will add that puppy somewhere in a heartbeat.
These two pics were cool looking but I wanted something larger and of course…more awesome!
But first things first. This is the way I used to store my necklaces.
I know, I know. Not very creative really, but I didn’t have a whole lot of options. I give myself some credit for thinking to use the hangers but I admit it’s not the best solution.
And here are my bracelets.
Stored neatly….well let’s just say stored in these nice plastic trays that I’ve had forever. Thank goodness I found some cool photos to inspire me.
Because I wasn’t following an actual pattern or anything we figured we would start planning the layout to determine what size boards to purchase.
Trying to figure out the spacing was a little tough. We measured and tried to space things out to make it look a like they were randomly placed but making sure there was enough room between the knobs for the necklaces and bracelets to hang.
If we ever did this project again, I would space the knobs a little differently. Seems to be a little too much spacing between the bracelet knobs, but that is more of a design flaw and not on the part of the constructor as my hubby was laying it out as requested and he did a great job.
After figuring out the dimensions, we purchased some 1/4” 2’x4’ MDF project panel board from Home Depot for around $15 including tax.
I purchased knobs at Hobby Lobby (a local craft store in the area) in the clearance section for around $50 for 43 knobs. You can find knobs at any home improvement store or craft/hobby shop. I did find some really cool looking ones but they were $4 each! Aaaccckkk!!! I stuck with the knobs that were around $1 each.
A buddy of mine gave me several door pulls and we used one on this project to hold some larger earrings that don’t fit in the containers I normally use. I have plans to use the other door pulls for another project soon. Be sure and check back and see what I’ve created.
After purchasing the board Marvin did a test run to see how the knobs would work.
Looks like it is going to work! He adhered the knobs and he cut down the end of the screws on the knobs as they were made to fit drawers/cabinets and were too long.
I really liked how it was turning out. Marvin then used some leftover paint from our master bedroom/bath remodel to paint the boards.
We gathered all the knobs and started attaching them to the boards.
We put it together and hung it up in our closet. It looked close to what I had envisioned in my head but not quite there yet.
Something seemed to be missing.
Marvin thought it might look more “finished” if we put a frame around it. He bought 3 strips of molding for around $3.70 each and cut them to fit the boards. We then gave them to my dad because we needed clamps to hold the frame together while it dried. My dad also let us know that they sell molding with a little ridge on the back that helps it make a better frame so you might want to ask at the home improvement store if they have anything like that.
Almost there! Now I just need to add my jewelry. 🙂 Doing a bit of a ::happy dance:: about how it turned out. I’m not sure if I’m going to leave the frame white, paint it green or possibly paint it another color. What do you think?
Dad also created a hanging device out of scrap wood. There were two pieces to it. One was attached to the back of the board and angled downward and it interlocked with a piece that you attach to the wall.
The other piece that was attached to the wall was angled upward.
Tada!!! The finished product!
Marvin and my Dad did an awesome job of bringing to life what I had envisioned. I think it looks awesome! Now in the space right above the lower board I was thinking of putting our initial with buttons glued on it (another Pinterest inspiration) or maybe something else. I was also thinking that since everything seems to be boxy looking I should try to put maybe an oval in that space. Not sure why I’m so concerned with “decorating” my closet but those are just the things coming to my mind.
So the total cost, not including the hanging piece my Dad made, was about $76 total. Or about $38 for each one depending on how you like to look at things. That’s not too bad for some custom pieces but if you are trying to keep costs low you could use scrap wood from previous projects and shop around a little more for the knobs.
- What projects have you tried lately?
- How do you store your jewelry?
2 thoughts on “My necklace/bracelet jewelry holder”